PRODUCT NAME : MINERAL OIL
Synonyms | MINERAL OIL |
---|---|
Company Name | NOVA COMPANY PRODUCES LUBRICATING OIL FOR EǪUIPMENT AND ENGINES |
Address | Block :7, Building :84, Lic No:208142, East Ahmadi, Kuwait |
Contact Number | +965- 60410970 / 51314011 |
Email | info@novalubricantskw.com |
FIRST AID MEASURES
This product is a complex mixture of Mineral oil.
Inhale Inject Skin Contact Eye Contact
Inhalation of mists, fumes or vapor causes irritation to the nose or throat or coughing. Move to the region of fresh air. If symptoms persist obtain medical advice.
If contamination of the mouth occurs, wash out thoroughly with water, except as a deliberate act. The ingestion of large amounts of product is unlikely. If it should occur, do not induce vomiting, obtain medical advice.
Wash with soap and large amounts of water. Remove contaminated clothing.
Flush eyes with large amounts of tap water for at least 15 minutes . If symptoms or irritation occur, call a physician
Inhale | Inject | Skin Contact | Eye Contact |
---|---|---|---|
Inhalation of mists, fumes or vapor causes irritation to the nose or throat or coughing. Move to the region of fresh air. If symptoms persist obtain medical advice. | If contamination of the mouth occurs, wash out thoroughly with water, except as a deliberate act. The ingestion of large amounts of product is unlikely. If it should occur, do not induce vomiting, obtain medical advice. | Wash with soap and large amounts of water. Remove contaminated clothing. | Flush eyes with large amounts of tap water for at least 15 minutes . If symptoms or irritation occur, call a physician |
FIRE FIGHTING MEASURES
For major fires, call the fire brigade immediately. Ensure an escape path is always available from any fire. In case of fire, use foam, dry chemical, carbon dioxide, vaporizing liquid or water delivered as a fine spray. Do not use water jets. Fires in confined spaces should be dealt with by trained personnel wearing approved breathing apparatus.
ACCIDENTAL RELEASE MEASURES
Personal Precautions: Keep the public away. Isolate and evacuate the area. Shut oX the source if safe to do so. Advise authorities if the substance has entered a watercourse or sewer. Notify local health and pollution control agencies if appropriate. Recover and return free products to proper containers. Use suitable absorbent materials such as vermiculite, sand or clay to clean up residual liquids.
HANDLING AND STORAGE
Precautions for Safe Handling: Avoid skin contact. Good working practices, high standards of personal hygiene and plant cleanliness must be maintained at all times. Whilst using, do not eat, drink or smoke. Wear appropriate gloves. Wash hands thoroughly after contact. Ensure good ventilation and avoid, as far as reasonably practicable, the inhalation and contact with vapors, mists or fumes which may be generated during use. If such vapor, mists or fumes are generated, their concentration in the workplace air should be controlled to the lowest reasonably practicable level. Avoid contact with eyes. If splashing is likely to occur then wear a full face visor or chemical goggles as appropriate. Use disposable clothes and discard them when soiled. Do not put soiled clothes into pockets. Take all necessary precautions against accidental spillage into soil or water.
Conditions for Safe Storage: Store under cover, away from moisture and sources of ignition. Do not overheat in storage.
EXPOSURE CONTROL/PERSONEL PROTECTION
Avoid, as far as reasonably practicable, inhalation of vapors, mists or fumes generated during use. If vapors, mists or fumes are generated, their concentration in the workplace air should be controlled to the lowest reasonably practicable level.
Respiratory Protection: If operations are such that the excessive generation and inhalation of vapors, mists or fumes may be anticipated, then respiratory equipment meeting appropriate requirements for mists, fumes and organic vapors should be worn.
Personal Protective Equipment: While handling, suitable protective clothing of an appropriate standard should be worn.
Depending upon the type of operation, this may include:
- 1. Visor to protect face and head covering with neck flap
- 2. Protective boots.
If skin contact is likely, wear impervious protective clothing and/or gloves. Protective clothing should be regularly dry-cleaned and laundered. Wash any contaminated underlying skin with soap and water.
Depending upon the type of operation, this may include:
- 1. Visor to protect face and head covering with neck flap
- 2. Protective boots.
PHYSICAL AND CHEMICAL PROPERTIES
Sr.No. | Test | Method | Unit | Results |
---|---|---|---|---|
1 | Appearance | Visual | - | Clear & Bright |
2 | Density @ 15 °C | ASTM D-1298 | gm/cc | > 0.84 |
3 | Colour | ASTM D-1500 | - | > 2.0 |
4 | Flash Point | ASTM D-92 | °C | > 132 |
5 | Viscosity @ 40 °C | Visual | cSt | > 6.27 |
6 | Sulphur Content | ASTM D-445 | % | < 0.05 |
7 | TAN | ASTM D-4294-16 | - | Nil |